Home › Concrete Patio Installation
Create an inviting outdoor living area with a custom concrete patio in Spokane, WA. We pour patios in a variety of shapes, finishes, and colors to match your home and backyard. From simple broom finished slabs to decorative stamped concrete, we design patios for low maintenance enjoyment. Contact us today for a free concrete patio estimate and layout consultation.
Majestic Concrete Spokane provides professional concrete patio throughout Spokane, WA, Washington and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (509) 632-4251 or request your free quote.
Concrete patios built for Spokane homes and weather
A concrete patio should work with your Spokane property, not fight it. At Majestic Concrete Spokane, we look at how you actually use your yard, what your soil is like on the South Hill, North Side, Valley, or West Plains, and how the freeze-thaw swings will treat the slab over time. Our concrete patios are built to handle winter heaving, spring runoff, and summer heat, so you are not chasing cracks a couple of seasons after installation.
During your first visit, we measure the space, check drainage patterns, and look for problem spots like downspouts dumping near the planned patio or low areas that already stay soggy. We also look at how the patio will connect to your existing house or garage slab, which is important in older Spokane neighborhoods where foundations can be shallow or uneven. This early site review shapes the design and the cost, and it helps avoid issues that typically show up only after concrete is already poured.
How Majestic Concrete Spokane installs a concrete patio, step by step
Our concrete patio installation process is straightforward and transparent, so you know what is happening in your yard each day.
1. Layout and excavation: We mark the patio outline to scale and confirm size and shape with you on the ground, not just on paper. Then we excavate to the proper depth, usually 6 to 10 inches depending on soil and intended use (light seating vs. hot tub or outdoor kitchen). In parts of Spokane with loose fill or old landscaping, we dig deeper until we reach solid, undisturbed soil.
2. Base preparation: A solid base is what keeps your patio from settling and cracking unevenly. We install and compact a layer of crushed rock or gravel, often 4 inches or more, using a plate compactor in multiple passes. If we find poor drainage or clay pockets, we adjust base thickness or add drain lines so water has somewhere to go besides under your slab.
3. Forms and slopes: We set sturdy wood or steel forms to define the exact shape, keeping edges straight and corners square or intentionally curved. We build in a slight pitch away from the house, usually about 1/8 to 1/4 inch per foot, so water runs off instead of pooling near your foundation. Many DIY or low-bid jobs skip this detail, which leads to ice sheet patios in winter.
4. Reinforcement: Depending on patio size and load, we install rebar, wire mesh, or both. For patios that will hold a hot tub or heavy masonry kitchen, we upgrade the reinforcement pattern and sometimes thicken the slab in specific zones. This step is critical in Spokane where freeze-thaw cycles constantly stress the concrete.
5. Pouring and finishing: We pour ready-mix concrete matched to the use and season, typically a 4 inch or thicker slab, then screed, float, and finish it to the texture you choose. We cut control joints at the right spacing for the slab size and shape, which is what controls where hairline cracks will go. For decorative patios, this is when stamping, edging, or special textures are applied.
6. Curing and cleanup: We cure the slab properly with sealers or coverings, depending on temperature and sun exposure. This early curing period is what gives you long-term strength. We remove forms, backfill edges, tidy up the yard, and walk you through use and maintenance guidelines before we consider the job finished.
Design options that fit Spokane backyards, not just catalog pictures
Concrete patios do not have to look like plain gray rectangles. Majestic Concrete Spokane offers design options that make sense for real Spokane yards and budgets, not just showroom photos.
Shape and layout: We often tie patios into existing decks, basement walkouts, or detached garages that are common around Spokane. For smaller North Side lots, we may do a compact, angled patio that maximizes usable space. On larger Valley or Five Mile properties, we can create multi-level or zoned patios with separate areas for dining, lounging, and fire pits.
Finishes and textures: Basic broom-finish concrete is still the most practical and slip-resistant option for many homeowners, especially on shaded lots that stay damp. For a higher-end look, we install stamped concrete that imitates stone, slate, or pavers, and expose aggregate that works well with mid-century and modern homes. We also offer hand-cut borders and saw-cut patterns so a simple slab gets visual structure without excessive cost.
Color choices: Integral color and surface staining can break up the solid gray look. Spokane’s light can be harsh in midsummer, so we often recommend lighter tones that stay cooler underfoot. We will show you sample boards and actual local installations so you can see how colors look in real Spokane daylight, not just in a brochure.
Add-ons: We can integrate concrete pads for hot tubs, planters, seat walls, or footing blocks for pergolas during the same pour. Running these items together often saves money compared to separate projects later, and the finished patio feels more intentional.
What affects the cost of a concrete patio in Spokane
Many homeowners ask why concrete patio prices vary so widely. With Majestic Concrete Spokane, we break down the factors so you can see where your money is going.
Size and thickness: More square footage means more materials and labor, but slab thickness and reinforcement matter almost as much. A simple 4 inch patio for light use costs less than a thicker slab designed to support a heavy hot tub, outdoor kitchen, or frequent vehicle loads.
Site conditions: Access is a big cost driver in Spokane’s older neighborhoods with narrow side yards or steep driveways. If we can get a truck close, your price is lower. If we have to pump concrete or move it by machine or wheelbarrow, labor and equipment costs go up. Soils that need deeper excavation or extra base rock also add cost.
Finish level: A basic broom finish with standard gray concrete is the most economical option. Stamped patterns, exposed aggregate, custom borders, or multiple colors increase labor time and material costs. We can usually quote a base price plus clear add-ons for each upgrade so you can adjust the design to fit your budget.
Preparation and demolition: If there is an old cracked patio, failing pavers, or a deck that needs removal, that demolition and disposal is a separate cost line. We price this realistically based on access, thickness, and haul distance, not as a vague “miscellaneous” fee.
Season and scheduling: Concrete moves differently in April than it does in August in Spokane. We schedule pours with weather in mind and may adjust mix designs or curing methods for heat or cold. Sometimes waiting a couple of weeks for a better weather window can save you from extra cold weather protection costs and gives a better finished product.
Common patio problems in Spokane and how we prevent them
Spokane’s climate is hard on concrete patios. Understanding common failures helps you see what matters during installation.
Cracking: All concrete cracks eventually, but the goal is to control where and how. We prevent random cracking by installing a stable base, reinforcing correctly, pouring the right thickness, and cutting control joints at the right spacing and depth. We also plan joint locations with your layout so they line up with doors, posts, or visual lines instead of running through the middle of a seating area.
Heaving and settling: Freeze-thaw cycles and poor drainage cause heaving. We address this with proper grading, carefully compacted base rock, and good water management. On sloped lots or areas with known moisture issues, we might recommend french drains, drain channels, or moving the patio footprint slightly to avoid chronic wet spots.
Drainage issues: Standing water on or against a patio surface is a warning sign. We pitch patios away from structures and look at the whole yard, not just the concrete footprint. If your gutters dump directly toward the planned patio, we will talk about rerouting downspouts or adding splash blocks or underground drains as part of the project.
Surface wear and scaling: Winter deicers, especially on shady patios, can chew up poor quality concrete. We use mixes and finishing methods suited to exterior Spokane conditions and recommend specific sealers and maintenance routines. We also explain which deicing products to avoid and when it is safe to use mild products without shortening the life of your patio.
What to know before you hire a concrete patio contractor in Spokane
Choosing a concrete patio contractor in Spokane should come down to more than the lowest quote. Majestic Concrete Spokane encourages you to ask detailed questions of any company you consider, including us.
Permits and codes: While most standard residential patios do not require complex permits, certain sizes, heights, or structural tie-ins can trigger local code reviews, especially near property lines or steep slopes. We help you understand what your specific project needs and do not gloss over boundary or setback issues.
Written scope and joints layout: Insist on a written scope of work that spells out slab thickness, reinforcement type and spacing, base depth, finish type, and joint layout. Many problems come from vague agreements. Our estimates describe these items so you can compare apples to apples between bids.
Mix and warranty details: Ask what concrete mix will be used, what strength, and what air content. For Spokane’s climate, air-entrained exterior concrete is standard practice. We will tell you how we stand behind our work and what is covered if issues arise that are clearly related to installation, not misuse or extreme events.
Access and disruption: Confirm how the crew will reach the work area, where equipment will be staged, and what will happen to existing landscaping. We plan access routes and protection for lawns and plantings as part of the proposal so there are fewer surprises on pour day.
Timeline and use: Finally, get a realistic schedule and clear instructions on when you can walk and place furniture on the patio, and when heavy loads like hot tubs or grills are safe. We would rather tell you a conservative timeline and protect the fresh concrete than rush you back onto it and risk early damage.
